Kun Shan University Institutional Repository:Item 987654321/9638
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 26442/27038 (98%)
造訪人次 : 11838509      線上人數 : 314
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    請使用永久網址來引用或連結此文件: http://ir.lib.ksu.edu.tw/handle/987654321/9638

    題名: Dressing Behaviors of PCD Conditioners on CMP Polishing Pads
    作者: M. Y. Tsai
    J. C. Sung
    J. D. Peng
    L. W. Yan
    貢獻者: 圖書資訊館
    關鍵詞: Chemical Mechanical Polishing
    Diamond Conditioner
    Polyurethane Pad
    日期: 2008-11-08
    上傳時間: 2010-04-12 14:41:02 (UTC+8)
    摘要: Diamond pad conditioner or dresser can determine
    the efficiency of chemical mechanical polishing (CMP)
    processes and the quality of polished wafers.
    Conventional diamond pad conditioners are made by
    adhering discrete diamond grits on a flat substrate. The
    size distribution of diamond grits coupled with the
    deformation of the substrate often make the tips of
    diamond grits lying at different heights. Instead of
    attaching individual diamond grits to a metal substrate,
    a revolutionary design of pad conditioners is based on
    carving a structure out of sintered polycrystalline
    diamond (PCD) matrix. The PCD dresser is
    manufactured by wire electro discharge machining
    (WEDM) to form cutting pyramids of a specific size
    with a designed shape. The dressing characteri stics of
    pad surface textures are studied by comparison with
    conventional diamond pad conditioner. Experimental
    results indicate that the PCD dresser can dress asperities
    of the pad more uniformly than the conventional
    diamond dresser due to PCD dresser having identically
    shaped tip and the same height diamond . In addition the
    cutting rate of PCD dresser for IC1000 pad not only is
    reduced by about 30% and also it can dress pad more
    effectively than conventional diamond dresser.
    顯示於類別:[機械工程系所] SME 2008第六屆全國精密製造研討會-國際製造工程學會中華民國分會


    檔案 描述 大小格式瀏覽次數
    A01-03本文.pdf628KbAdobe PDF23檢視/開啟


    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋