Kun Shan University Institutional Repository:Item 987654321/9283
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 26358/26955 (98%)
造访人次 : 11282341      在线人数 : 555
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ksu.edu.tw/handle/987654321/9283


    题名: 以連續摩擦帶電變化監控純金屬薄膜間磨潤行為的新穎方法
    其他題名: A novel method of using continuous tribo-electrification variations for monitoring the tribological properties between pure metal films
    作者: 蔡齊峻
    Tsai, Chi-chun
    指導教授: 周煥銘;張育斌
    关键词: 摩擦帶電
    Dynamic monitoring,
    鎳薄膜
    界面滑動
    表面滑
    動態監控
    錫薄膜
    Tin film
    Nickel film
    Interface slip
    Surface slip
    Tribo-electrification
    日期: 2006-05-08
    上传时间: 2010-03-11 10:56:36 (UTC+8)
    摘要: 本文使用連續摩擦帶電變化的新穎方法作為監控金屬薄膜間之磨潤性質研究。通常,由於摩擦係數對滑動距離的連續變化經常不夠明顯,因此有必要再研發其他新穎性方法應用於即時監視金屬薄膜間之磨潤性質。本研究之初步目標在於探討此種新穎方法之可行性及靈敏性。首先,實驗證明這種新方法也能較精確的評估軟金屬薄膜如錫薄膜之固體潤滑性。綜合實驗結果,本研究提出錫薄膜在不同垂直負荷下的摩擦帶電及微磨耗之連續變化機制。
    而且,因為摩擦係數之值總是顯示正值,它是難以從多層膜中即時區分滑移發生在哪一層的。然而,透過正或負極性的摩擦帶電電位之連續變化,從多層膜中即時區分出滑移實際發生在哪一界面卻是可能的。因此,本研究之另一目標即在於探討此種新穎方法之判別性。而且,這種新方法也能較精確的評估硬金屬薄膜之抗磨耗性。綜合此部份之實驗結果,本研究提出鎳金屬薄膜在不同垂直負荷下的摩擦帶電及薄膜磨耗之連續變化機制。
    最後再進一步探討不同軟及硬金屬鍍層之膜厚對於磨擦帶電變化之影響。本論文之實驗數據及研究成果可供相關產業日後設計及研發的參考依據。
    The novel method of using continuous tribo-electrification variations for dynamic monitoring the tribological properties between the metal films was studied experimentally in this paper. Generally, the continuous variations of the friction coefficient with sliding distance were unobvious and difficult to apply to monitor the tribological properties between the metal films. Hence, it was necessary to investigate another novel method. The original purpose of this paper was to appraise the practice and sensitivity of the above novel method. First of all, it was proved that the novel method was better for appraising the solid-film lubrication of the soft metal films. Combined the above results, a continuous model describing the tribo-electrification and wear mechanisms for a thin film of tin metal at different normal loads was proposed.
    Moreover, since the value of the friction coefficient always showed positive, it was indiscriminative. By the continuous variations of tribo-electrification voltage with polarity that was positive or negative, it was possible to determine that friction occurs on which surface and which is the slider. Therefore, another purpose of this paper was to investigate the discrimination of this novel method. Furthermore, the novel method was better for apprising the wear resistance of the hard metal films. A continuous model describing the tribo-electrification and wear mechanisms for a thin film of nickel metal at different normal loads was also proposed.
    Finally, the effects of the film-thickness on the variations of tribo-electrification were investiged in detail. To sum up, the experimental results can be widely used for designing the micro sensors in the future.
    显示于类别:[機械工程系所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    0306200810414312_摘要.pdf59KbAdobe PDF262检视/开启
    0306200810414312_目次.pdf58KbAdobe PDF373检视/开启
    U0025-0306200810414312-1.pdf5367KbAdobe PDF285检视/开启


    在KSUIR中所有的数据项都受到原著作权保护.


    本網站之所有圖文內容授權為崑山科技大學圖書資訊館所有,請勿任意轉載或擷取使用。
    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈