Kun Shan University Institutional Repository:Item 987654321/7922
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 27269/27865 (98%)
造访人次 : 17965934      在线人数 : 354
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻

    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ksu.edu.tw/handle/987654321/7922

    题名: Patterning of carbon-nanotube emitters on silver paste substrates using laser-induced forward transfer method
    作者: Chung-Wei Cheng
    Hui-Ta Chen
    Jeng-Rong Ho
    J-W John Cheng
    关键词: laser-induced forward transfer
    carbon nanotube
    日期: 2008-11-08
    上传时间: 2010-01-13 11:29:08 (UTC+8)
    摘要: A nanosecond (ns) laser-induced forward transfer
    (LIFT) technique is developed for the patterning of
    carbon nanotube (CNT) emitters on silver paste
    substrates under ambient pressure and temperature
    conditions. In the proposed approach, an
    infrared-transparent support substrate coated with a thin
    CNT film irradiated by a Nd:YAG (1064 nm) pulsed
    laser beam. The resulting laser fluence of 1.96 J/cm2
    transfers CNTs from the thin film to the silver paste
    substrate without causing any damage to the support
    substrate. Two different receiving substrates are
    employed, namely wet silver paste and pre-cured silver
    paste, respectively. The field emission test results
    obtained for a square-type CNT pattern deposited on the
    wet silver paste substrate and a line-type CNT pattern
    deposited on the pre-cured silver paste substrate
    confirm the effectiveness of the proposed patterning
    显示于类别:[機械工程系所] SME 2008第六屆全國精密製造研討會-國際製造工程學會中華民國分會


    档案 描述 大小格式浏览次数
    A02-04本文.pdf366KbAdobe PDF38检视/开启


    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈