Kun Shan University Institutional Repository:Item 987654321/7844
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 25831/26425 (98%)
造访人次 : 8065306      在线人数 : 422
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ksu.edu.tw/handle/987654321/7844


    题名: Numerical Study of the Magnetorheological Abrasive Flow Finishing Flow Field
    作者: C. H. Tai
    F. L. Lih
    Z. K. Hsu
    W. C. Feng
    C. W. Kuo
    关键词: CFD
    MRAFF
    MRPF
    material removal
    finishing efficiency
    日期: 2008-11-08
    上传时间: 2010-01-12 09:24:05 (UTC+8)
    摘要: A numerical approach on the finishing efficiency of magnetorheological abrasive flow finishing (MRAFF) process was performed in the present study. MRAFF is basically a combination of abrasive flow maching (AFM) and magnetorheological finishing (MRF). This process relies on smart magnetorheological fluids whose rheological behaviour is controllable by means of external magnetic field. It was developed for super finishing of internal geometries of hard materials. Generally speaking, the viscosity of magnetorheological polishing fluid (MRPF) will become large with enhancement of the external magnetic field, Generally speaking, the viscosity of MRPF will be enhanced with the external magnetic field larger, and the effect of polishing is better. But if unlimited increase the viscosity of MRPF, may be to cause negative impact on the MRPF mobility, even scratched the workpiece. Therefore, in order to incorporate better in-process control of finishing action and to study the effects of various process parameters, numerical investigations into the mechanism of MRAFF process is necessary.
    This research has established the analysis tool of MRAFF process. Simultaneously, the performance analysis to estimate the planar material removal obtained during MRAFF under the different magnetic field strength is also proposed. The predicted result showed that magnetic field strength significantly affects the viscosity of MRPF and material removal. When the external magnetic field is 0.25 Tesla, obtained finishing efficiency is the highest.
    显示于类别:[機械工程系所] SME 2008第六屆全國精密製造研討會-國際製造工程學會中華民國分會

    文件中的档案:

    档案 描述 大小格式浏览次数
    A01-27本文.pdf442KbAdobe PDF56检视/开启


    在KSUIR中所有的数据项都受到原著作权保护.


    本網站之所有圖文內容授權為崑山科技大學圖書資訊館所有,請勿任意轉載或擷取使用。
    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈