Kun Shan University Institutional Repository:Item 987654321/3597
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 26442/27038 (98%)
造訪人次 : 11839127      線上人數 : 258
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ksu.edu.tw/handle/987654321/3597


    題名: Modeling and simulation of non-uniformity in the planarization process
    作者: 洪興林(HorngThin-Lin)
    關鍵詞: Non-uniformity
    Material removal
    Deformation
    Planarization
    日期: 2009-03-19
    上傳時間: 2009-08-15 00:54:16 (UTC+8)
    摘要: The estimation of surface non-uniformity undervarious machining parameters (such as dressing force,diamond density of dresser, rotational speed of dresser,different machining paths, etc.) is essential to the planarizationprocess. Based on abrasive theory and the deformationanalyses of a polishing pad, this paper develops a model tocalculate material removal in the planarization process andthen calculate non-uniformity by using this model. Theresults reveal that the non-uniformity is in good agreementwith experimental data. Moreover, it was found that thenon-uniformity decreased when the dressing time increased.
    關聯: Int J Adv Manuf Technol (2008) 39:512–520
    顯示於類別:[機械工程系所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    洪興林-97獎助申請表(論文刊登)論文2-Modeling and Simulation of Non-Uniformity in the Planarization Process.pdf492KbAdobe PDF611檢視/開啟


    在KSUIR中所有的資料項目都受到原著作權保護.


    本網站之所有圖文內容授權為崑山科技大學圖書資訊館所有,請勿任意轉載或擷取使用。
    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋