Kun Shan University Institutional Repository:Item 987654321/12873
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 26655/27251 (98%)
Visitors : 12287166      Online Users : 324
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version

    Please use this identifier to cite or link to this item: http://ir.lib.ksu.edu.tw/handle/987654321/12873

    Title: 超高壓電纜終端應力錐電場分析
    Authors: 王瑋民;林于正鄭強;范振理;陳柏江;莊忠勇
    Contributors: 電機工程系
    Keywords: 電纜終端匣;應力錐
    Cable Termination;Stress Cone
    Date: 2010-12-03
    Issue Date: 2010-12-16 15:15:08 (UTC+8)
    Publisher: 台南縣:崑山科技大學
    Abstract: 高壓電纜端末接續處理時,常採用應力錐來改善接續處之高電力線密度集中現象。本文以345kV 電纜終端匣為研究對象,首先模擬因施工失誤,造成應力錐安裝未達定位時對電場強度之影響探討與正常施工下的差異;其次探討應力錐本體採用不同介電係數材料時,對電力線分佈改變之影響。
    Stress cone is widely used on high voltage power cable termination to mitigate the high electric flux density. This paper focuses on the 345kV system. Firstly, the field intensity resulted from the incorrect installation of stress cone are simulated. Then the influences on electric flux distribution of the stress cone with different dielectric constant materials are analyzed.
    Relation: 第31屆電力工程研討會
    Appears in Collections:[Graduate School and Department of Electrical Engineering] The 31st Symposium on Electrical Power Engineering

    Files in This Item:

    File Description SizeFormat
    S0070 論文本文.pdf234KbAdobe PDF2107View/Open

    All items in KSUIR are protected by copyright, with all rights reserved.

    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback