Kun Shan University Institutional Repository:Item 987654321/12863
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 26415/27011 (98%)
Visitors : 11653749      Online Users : 220
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version

    Please use this identifier to cite or link to this item: http://ir.lib.ksu.edu.tw/handle/987654321/12863

    Title: 接地對高頻比流器測量局部放電之影響
    Authors: 陳建一;謝如主;戴政祺;陳建富
    Contributor: 電機工程系
    Keywords: 高頻比流器;油浸式變壓器;局部放電
    High-Frequency Current Transformer (HFCT);Oil-immersed Transformer;Partial Discharge (PD)
    Date: 2010-12-03
    Issue Date: 2010-12-16 15:14:55 (UTC+8)
    Publisher: 台南縣:崑山科技大學
    Abstract: 本文使用標準脈波產生器產生脈波通過高頻比流器,從高頻比流器量測到信號的幅值和標準脈波產生器的電量比對。並模擬局部放電電流流過油浸變壓器接地線,接地線電阻大小不同時,相同放電量高頻比流器量測到的幅值變化。油浸式變壓器的接地線條數不同時,其高頻比流器量測到信號的幅值亦受到影響。當放電位置在油浸式變壓器的一次側、二次側及外殼,由於線圈沒有接地,高頻比流器量測到的到信號的幅值也可以觀察到不同的信號反應。因此以高頻比流器量測高壓設備的放電量值時,應依其接地電阻大小、接地線的數目、放電的位置及量測量的頻段修正其放電量測值。
    In this paper, we use a standard pulse generator as the test signal source and passing it through a high frequency current transformer (HFCT) to simulate the partial discharge (PD) and study the effect of various configurations of grounding. The detected signals were compared with the original signals generated from the standard pulse generator. When the grounding has different resistance, the detected signal from the HFCT shows different amplitudes for the same simulated PD signal. For the cases of changing the number of groundings to the oil-immersed transformer, the signals that the HFCT measured also show different results. The locations of the simulated PD in the primary winding, second winding, and shell of an oil-immersed transformer, as the coils were not grounded, the amplitude of detected signals by HFCT will also be different. We conclude that when apply the PD measurement using HFCT for high voltage equipments, the measured data should be modified according to the ground resistance, the number of groundings, the PD position, and frequency bands.
    Relation: 第31屆電力工程研討會
    Appears in Collections:[Graduate School and Department of Electrical Engineering] The 31st Symposium on Electrical Power Engineering

    Files in This Item:

    File Description SizeFormat
    S0057 論文本文.pdf701KbAdobe PDF861View/Open

    All items in KSUIR are protected by copyright, with all rights reserved.

    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback