English  |  正體中文  |  简体中文  |  Items with full text/Total items : 25398/25993 (98%)
Visitors : 6191101      Online Users : 28
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ksu.edu.tw/handle/987654321/10695


    Title: 乾磨耗滑動條件下PEEK 及UHMW-PE 之磨潤特性研究
    其他題名: Tribological Behavior of PEEK and UHMW-PE in Unlubricated Sliding Contact
    Authors: 廖培凱(Peikai Liao)
    施鴻培(Hung-Pei Shih)
    林明長(Ming-Chang Lin)
    Contributor: 圖書資訊館
    Keywords: 聚醚醚酮
    磨潤性質
    環-盤對
    超高分子量聚乙烯
    PEEK
    tribological behavior
    ring-on-disc
    UHMW-PE
    Date: 2009-04
    Issue Date: 2010-06-30 14:17:16 (UTC+8)
    Abstract: 本文針對高分子材料聚醚醚酮 (PEEK) 及超高分子量聚乙烯 (UHMW-PE)
    兩種高分子材料,利用環-盤對 (ring-on-disc) 試件,在不同轉速與負載的對偶配
    對下進行磨耗試驗,探討其摩擦與磨耗性能,以及所產生的溫度變化與磨潤性質
    之關係,可得知在相同PV 值情況下,磨耗率及表面溫度受到接觸應力之影響較
    滑動速度明顯。研究中並利用光學顯微鏡觀察上述高分子材料表面的摩擦、磨耗
    機制與現象。
    The tribological behavior of poly(ether-ether-ketone) (PEEK) and ultra high molecular
    weight polyethylene (UHMW-PE) in sliding contact is studied. The specimen
    used in the wear and friction test is a pair of ring and disc. The tribological characteristics
    of polymers can be measured under specific contact stresses combined with a wide
    range of sliding speeds under well-controlled conditions. The temperatures of the disc
    will be measured and calculated by thermocouples. Therefore, the wear property and
    surface temperature will be investigated to find the relationship between them. It is apparently
    that the factor of contact stress is more effective than that of sliding speed at
    the same PV. Consequently, the wear mechanisms of worn specimen surfaces are examined
    by the optical microscope. The relationship between wear behavior and thermal
    effect is established.
    Relation: Journal of Advanced Engineering,Vol. 4, No. 2, pp. 127-132
    Appears in Collections:[機械工程系所] 期刊論文

    Files in This Item:

    File Description SizeFormat
    廖培凱_127-132.pdf569KbAdobe PDF1166View/Open


    All items in KSUIR are protected by copyright, with all rights reserved.


    本網站之所有圖文內容授權為崑山科技大學圖書資訊館所有,請勿任意轉載或擷取使用。
    ©Kun Shan University Library and Information Center
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback